We manufacture Pipe from 100 MM to 1800 MM in NP2/NP3/NP4 Class

We are the first manufacturer in North-Eastern States to have ISI Certification for RCC Pipes as per IS 458:2021

Pipes are properly stacked and ready for dispatch after curing.

Curing of Precast Pipes.

We ensure that each of our pipes is fully cured to achieve the desirable strength.

Three Edge Bearing Test

Testing of pipes by NHIDCL officials and the contractor for the Daboka-Dimapur 4 Laning Project.

Testing Facilities for RCC Spun/Hume Pipes

1. Three-Edge Bearing Test 2. Hydro-static Test 3. Permeability Test 4. Straightness Test 5. Dimension Test 6. Cube Test

Three-Edger Bearing Test

Hydrostatic Test

Permeability Test

About Precast Concrete Pipes

Walter Reginald Hume (1873-1943) of Australia invented the process of making concrete pipes by spinning/centrifugal process in 1910.

After it inventor concrete pipes are called Hume pipe. It was made through spinning/centrifugal process so it it also called rcc spun pipes or concrete spun pipes.

  1. RCC Hume Pipe or Hume Pipe.
  2. RCC Spun Pipe or Spun Pipe.
  3. RCC Pipe.
  4. Cement Pipe or Concrete Pipe.
  5. Culvert Pipe.
  6. Sewerage Pipe or Drainage Pipe.

Following are the key areas where hume/spun pipes are used.

  1. Drainage
  2. Sewerage
  3. Rail/Road Culvert
  4. Irrigation / Water Supply
  5. Storm water Drain
  6. Water Well
  7. Septic Tank
  8. OFC / Electric / Phone Cable laying

We manufacturer pipe sizes from 100 mm to 1800 mm i/d and available in NP2 , NP3, NP3, & P1 class as per IS:458